How to choose OBDII head-up display ( HUD )

Opting for an OBDII (On-Board Diagnostics II) head-up display can help you conveniently monitor your vehicle’s diagnostic information and performance data while driving. Here are some important factors to consider when purchasing an OBDII heads-up display:
( 1 ) Compatibility: Make sure the selected head-up display is compatible with your vehicle's OBD2 interface. Most vehicles built after 1996 have an OBD2 interface, but some earlier vehicles may require a specific OBDII adapter.

( 2 ) Display information: Make sure the head-up display can display the information you care about most, such as vehicle speed, rpm, oil pressure, water temperature, fuel efficiency, etc. Some advanced models also offer engine fault code reading to help you diagnose vehicle problems.

( 3 ) Installation method: Consider your vehicle type and personal preferences, and choose a suitable installation method. Some heads-up displays can be clipped onto the windshield, while others need to be mounted in the upper of dashboard.

( 4 )  Size and display quality: Consider the size and display quality of your HUD.  A properly sized and high-resolution display ensures that information is clear and readable.

( 5 )  Features and options: Check whether the heads-up display has additional features such as night mode, automatic brightness adjustment, multiple display themes, etc. These features increase ease of use. 

( 6 ) Brands and Reviews: Look for products from reputable brands and check online reviews and user opinions to ensure you are purchasing a product with good performance and reliability.

( 7 )  Price: Set a budget and look for options that fit within that budget. Note that higher price does not necessarily mean better performance, so compare different brands and models carefully.

( 8 )  Ease of installation and setup: Consider whether you will be able to install and set up your HUD yourself, or whether you will need professional installation services.

To sum up, purchasing an OBD2 head-up display needs to be considered based on your vehicle needs, personal preferences and budget. Make sure you choose a product that allows you to obtain useful information while driving and improve driving safety and comfort.

  How to install Electronic Throttle Controller

Throttle controllers are often used to improve vehicle performance, particularly to enhance acceleration response. The product manual should be read carefully before installation. The following are the general steps for installing a throttle controller:

( 1 ) Determine compatibility: First make sure the throttle controller you purchase is compatible with your vehicle model. Different car models may require different cable harness.

( 2 ) Prepare tools: Prepare the required tools, including wrenches, screwdrivers, wires, knives, cable ties, connectors, etc.

( 3 ) Find the location of the accelerator pedal connector: Usually, the throttle controller needs to be installed near the accelerator pedal location or near the control circuit. You need to open the vehicle's door and find the pedal position.

( 4 ) Install the controller: Follow the instructions in the product manual to secure the throttle controller in place.

( 5 ) Set the throttle controller: turn off the car engine power and let the display of controller completely be turned off. Press and hold the up and down button  at the same time before turning on the ACC of car(don’t start the car engine). When the countdown is over and the display shows the L, press the down button. When the display shows H, then step on the accelerator to the bottom, at the same time press the down button. After see the display shows “0”, then release the accelerator and the setting is completed.

( 6 ) Test function: Start the car engine power and test the function of the throttle controller. Make sure it changes throttle response and acceleration properly.

( 7 ) Adjust settings: Depending on your personal preference, you may need to adjust the throttle controller settings. This can usually be done on the controller.

( 8 ) Complete the installation: Once you are sure that everything is working properly, you are done with the installation. 

If you are not sure how to install the throttle controller, please surf our installation video or contact our company and we will patiently teach you how to complete the installation.